Sentinel I28 Leak Detection System

  • Sentinel I28 Leak Test Device

Cincinnati Test Systems’ Sentinel I28 is one of the most advanced multi-functional test instrument on the market. This single-station air flow and leak detection system features a standard valve manifold design that is tested for over 40,000,000 cycles. This manifold is paired with a new high performance pressure transducer that reduces test cycle times and improves accuracy and repeatability. A high contrast 24 bit color TFT display provides XY graphing for pressure, loss, or flow.

Sentinel I28 Leak Testing Technologies

The Sentinel I28 leak detection system is configurable for a variety of pressure decay testing or mass flow testing requirements. It provides storage for up to 99 pre-programmed test sequences, and features a “Parent Program” that holds a customized test sequence for your multi-test application.

The test program can be selected via keypad, RS232, or binary. Test result evaluation is user-selectable (fail/pass/fail, etc.). The output format for test results can be configured to meet your needs.

Pressure Decay/Mass Flow Test Options

差压力衰减测试选项

Selectable Test Parameters

  • Quick test
  • Test pressure level compensation (selectable on/off)
  • Adjustable environmental drift correction per test program

The Sentinel I28 single-station leak detection system is designed for easy operator setup and troubleshooting. It features a small footprint (12” x 9.25” x 8.75”) for easy installation in limited space, including wall mounting. All CTS instruments include password protected program and test result storage.

Advanced Features

  • Powerful 32-bit processor with 24-bit A/D converter
  • Language-neutral color LCD with 12 line, 480 x 272 operator display
  • XY graphing (pressure, loss, or flow)
  • 英语,中文,韩语,西班牙语选项
  • Indicator light bar identifies test status: Pass/Fail/In-test
  • Expanded instrument control throughEtherNet/IP™ communication
  • 酒吧code-ready input RS232 alpha-numeric string stored with test results
  • 模块化气动和控制包

标准功能

  • Auto calibration includes mass flowleak standardcertified for pressure and flow
  • Transducer zero and span are automatically reset during auto calibration
  • “Performance factor” calibration feedback ensures accurate results
  • Manually configurable calibration program
  • Self-test isolates the Sentinel I28’s pneumatics to verify a “no leak” condition
  • Firmware validation document included

Standard Test Pressure Ranges

Standard pressure transducer, valve manifolds, and regulator ranges:

-14.5, -2, -0.1 to 4” HG, 0.5, 2, 30, 100, 200, 400, 500, or electronic regulation (PSIG)

  • Optional low volume test manifold available
  • Optional high cV flow valves and manifold available up to 100 psig range allows 5X faster fill and exhaust to reduce cycle times on large parts
  • Optional low volume (0.07cc) manifold available
  • Absolute pressure transducer
  • Six point pressure calibration
  • Data resolution 0.00001 psi/ and scc/m.
  • Optional electronic regulator available with multi-point calibration

Mass Flow Sensor Ranges

CTS will optimize the flow sensor and flow range of your Sentinel I28 leak testing equipment to meet the needs of your unique application.app华体会网址 for available mass flow sensors.

Selectable Test Units of Measure

Units of measure can be instrument global or per test program

Pressure

  • PSIG
  • PSIV
  • inH2O
  • cmH2O
  • mmH2O
  • kg/cm2
  • ATM
  • inHg
  • cmHg
  • mmHg
  • KPA
  • Pa
  • MPa
  • 酒吧
  • mBar
  • Torr

Flow

  • sccm
  • sccs
  • scch
  • slpm
  • slps
  • slph
  • s

Time

  • sec
  • msec
  • min

工具控制

  • Expanded control throughEtherNet/IP™ communication
  • 12 inputs and 12 outputs, with up to five (5) programmable tooling motions with feedback
  • Part marking control
  • 工具I/O在外部连接
  • I/O 24 VDC: optional I/O cable “Cable,CTS, A12-610(standardx2)”

Test Data Storage

  • Up to 5000 LIFO part results including date, time, barcode, and test results
  • Selectable part serialization in the test data stream
  • SPC数据跟踪零件可追溯性
  • Expandable download through USB port
  • External test data storage and wave form analysis through interface with theQualityWorX CTS DataHub

Electrical Requirements & Connectivity

  • 88-264 VAC, 47-63 Hz, or optional 22-26 VDC
  • RS232(2)
  • Telnet(1)
  • Email alerts
  • 酒吧code ready (RS232)
  • Mobile text
  • USB mass storage device for backup, restore, and reports (FAT32, USB1.0,1.1,2.0)
  • ¼” Colder fitting for test line attachment

The World Leader in Leak Testing Equipment

CTS has more than 35 years of experience in engineering and manufacturing high precision, repeatable, and reliable instruments for demanding leak test applications in manufacturing environments. Our application engineers will work with you to develop a custom solution specifically suited to your needs.

所有CTS仪器均经过认证,并具有两年有限的保修。所有标准仪器的正常交付是2-4周加上交货时间。

app华体会网址 要获取Sentinel I28泄漏检测系统或其他所需的泄漏测试设备。

QUOTE REQUEST

TEST TYPE:
PRESSURE SELECTIONS:
MASS FLOW RANGE:
REJECT RATE:
REJECT UNITS:
PRESSURE:
PRESSURE UNITS:
QUANTITY:
Ordered
in Lots of: 1
Baidu
map