压力测试在使用前的强度和泄漏用于零件。有多种压力测试过程,每个测试过程都对压力容器提供不同的特定检查。压力测试对于确保压力容器的正确操作和安全非常重要。
The Experts in Integrated Pressure Testing Equipment
When you need to integrate a pressure test unit into your assembly verification application, turn to Cincinnati Test Systems (CTS). With over thirty years of experience in designing and building pressure testing equipment, along with our expertise in pressure test applications that utilize methods like hydrostatic testing to proof testing, you can rest assured your test performance is optimized with the utmost safety in mind.
液压测试和静水测试
静液压测试用于测试容器或空腔是否泄漏以及结构强度和压力紧密。CTS可以设计,构建和集成低压和高压液压测试仪器,以进行突发,泄漏,流动,校准或零件的完整性测试。我们的
静液压测试单元可以包括手动或自动测试功能,自动零件负载/卸载功能,并旨在收集详细数据以进行测试评估。
Occlusion Testing
闭塞测试用于检测压力容器内通道的阻塞(闭塞)。该测试使用固定源的常数施加压力,通过测量和记录固定时间段结束时零件的入口(上游)的背压来检测打开或部分封闭的状态。我们的
occlusion test systemsutilize mass flow technology to ensure reliable results and repeatability.
压力升高测试/压力增加测试
这些压力测试单元用于多种用途,包括从零件中检测泄漏或检测到正在测试的零件内的限制和/或阻塞。在大多数情况下,该测试是通过测量屏障或壁的下压力侧的任何压力来进行的,该壁压或墙壁的下压力侧的压力侧是从较高的压力侧密封的(通常是填充或密封的测试零件周围的腔室)。CTS
pressure rise leak testing equipmentis engineered to detect even the smallest leaks in sealed parts.
证明测试
Proof testing is a technique used to stress the part under test to ensure it is capable of maintaining a certain level of pressure or vacuum for a period of time without gross failure. The test operates by ramping pressure or vacuum to the test part at a fixed rate for a fixed period and then holding that final pressure for an additional fixed time period. Any drop below a minimum pressure level indicates the part has failed. Our
证明测试单元使用最先进的技术通过可自定义的测试流程提供可靠的结果。
Ramp to ∆P Event Testing
这种测试方法通常被用来测试check valves, pressure relief valves, or other products designed to drastically change state (vent or seal) when pressure is increased or decreased. This type of pressure testing is also often used for burst testing. In this test, pressure to the test part is ramped up or down at a fixed rate until a sudden change of pressure is seen on the inlet of the part, indicating the change in state or “event”; any event detected above or below the expected range of final event inlet pressures is failed. Our
ramp to ∆P event pressure testing units
feature advanced test algorithms for superior accuracy and reliability.
Pressure Decay/Vacuum Decay Testing
这是当今泄漏测试中使用的最常见的压力测试单元。该测试填充或充电到目标压力,隔离压力,并在固定时间内测量压力的衰减。最终结果可以通过三种方式显示:泄漏率,∆P(总压变化)或∆P/∆T(压力变化/时间)。我们提供一系列
pressure decay/vacuum decay leak testing equipment为您提供独特需求的理想解决方案的选项。
压力测试单元for All Applications
35多年来,CTS一直为苛刻的应用提供高性能压力测试设备,包括:
We will work with you to determine the best pressure test system to use—whether it’s one of our pressure testing units or another method—to achieve your testing goals.
与您需要的高精度压力测试单元联系CTS
Request a quote on pressure testing equipment or
app华体会网址
今天开始与我们的工程师团队合作,以便我们可以开发一个适合您需求的压力测试单元。